Specification
Die-cutting ways | Flat to flat (with upper platen fixed and lower platen movable) |
Max. Paper Size | 1500×1100mm |
Min. Paper Size | 550×550mm |
Max. Die-cutting Size | 1495×1095mm |
Min. Gripper Margin | 7mm |
Max. Die-cutting Pressure | 120N/cm2 |
Paper Processed Cardboard Corrugated paper | Cardboard 200-2000g/m2, Max corrugated board thickness 8mm |
Die-cutting precision | ±0.25mm |
Max. Die-cutting Speed: | 4000sheets/h |
Max. Height of Feeding Pile | 1400mm(from the floor) |
Max. Height of Delivery Pile | 1200mm (from the floor) |
Power of main motor | 11KW |
Total Power | 13.5KW |
Whole macheine weight | 16T |
Dimensions(length×width×height) | 4200×2300×2200mm(pedal is not included) |
The configurations of the machine
Main Driving System
* The main driving system adopts worm wheel and worm gear pair and special crank shaft linkage
mechanism connected by bearing shell which can reduce locomotive gap, avoid impacting and
ensure smooth running.Pressure of die-cutting is high and able to be kept in high spot.The worm
gear adopts casting tin bronze to ensure long working hours and low abrasion.
Main Chain Drive
* The main chain adopts Japan over loading driving chain with precise length, high intensity against
pulling and considerable abra-sion resistance. Intermission me-chanism adopts parallel three-cam
indexing mechanism with high pre-cision. The curve of cam is designed specially and the cam stroke
angle is great to achieve smoother running of gripper bars. To ensure safety, imported over-load
protector is added between intermission mechanism and axle of main driving chain in order to stop
the machine automatically when over load occurs.
Electrical Control Part
* Computer control is adopted which can keep paper's feeding, transfering, die cutting and delivery in
automatic control and real-time detection.Man-machine interface indicating system will show machine's
working state, trouble's position and its solution. There are various safe guarding devices that when
accident occurs, it will give an alarm by sound and light and shut-down automatically to protect safety
of man and machine.
Die-cutting Part
* The active-rotating system is with strong pressure and long working hours after special design and
optimized treatment. The central-position system and plate turning structure provide great convenience
to operation. Borad nail is adopted for registration and the down steel plate adopts air-switch,
which make it easy to install and remove.
Man-machine Interface
* The high-resolving power interface in machine can inspect working state of the machine and display
all information such as speed, amount of die-cutting sheets, working state, input and output of PLC
and position, cause and solution of trouble. It is convenient and reliable for machine's adjusting and
trouble-shooting.
Pneumatic Locking Mechanism
* Mported cylinder with high stability is adopted to meet easy and quick operation.
